Window Film

• • Regular Cleaning and Stain Removal:
    • Common window cleaners, including ammonia products, may be used 30 days after installation.
    • Blot with soft cloth or squeegee dry.
    • Care must be taken to avoid scratching the film. Do not use abrasive cleaners, bristle brushes, paper towels, or newspaper.
  • Caution:
    • Never apply tape or adhesive products to the window film. Doing so may void the warranty.

Back to Top

Shutters

• • Regular Cleaning: Dust with a feather duster or lightly vacuum with an upholstery attachment.
  • Soil and Stain Removal:
    • Wood: Clean with Pledge, or other spray polish for wood products, and a soft cloth. Do not use abrasive cleaners or solvents. Do not immerse in water; doing so may void the warranty.
    • Composite: Gently sponge with a solution of mild detergent and warm water, then blot dry. Do not use abrasive cleaners or solvents. Do not immerse in water; doing so may void the warranty.

Back to Top

Solar Shades | Roller Shade & Sliding Panels

• • Regular Cleaning: Dust with a feather duster or lightly vacuum fabric with an upholstery attachment.
  • Soil and Stain Removal:
    • Gently sponge with a solution of mild detergent and warm water, then blot dry.
    • To avoid permanent creasing, do not twist, wring, or fold the fabric, particularly with blackout fabrics.
    • Do not use abrasive cleaners, solvents, strong detergents, or spot removers.
    • Do not dry clean; doing so may void the warranty.

Back to Top

Horizontal and Vertical Blinds

• • Regular Cleaning: Dust with a feather duster or lightly vacuum with an upholstery attachment.
  • Soil and Stain Removal: Instructions vary by material.
    • Aluminum: Gently sponge with a solution of mild detergent and warm water, then blot dry.
    • Wood: Clean with Pledge, or other spray polish for wood products, and a soft cloth. Do not use abrasive cleaners or solvents. Do not immerse in water; doing so may void the warranty.
    • Faux Wood & Composite: Gently sponge with a solution of mild detergent and warm water, then blot dry. Do not use abrasive cleaners or solvents. Do not immerse in water; doing so may void the warranty.
    • Vinyl: Vanes may be removed and immersed in water. Do not use abrasive cleaners or solvents.  Leaving a thin film of mild detergent on vanes will eliminate static electricity.
    • Fabric: Gently sponge with a solution of mild detergent and warm water, then blot dry; or use dry fabric cleaner. Do not immerse fabric vanes in water. Do not iron. Do not dry clean; doing so may void the warranty.

Back to Top

Cellular Shades

• • Regular Cleaning: Dust with a feather duster or lightly vacuum fabric with an upholstery attachment. Use care not to crush the pleats.
  • Soil and Stain Removal:
    • Gently sponge with a solution of mild detergent and warm water, then blot dry.
    • To avoid permanent creasing, do not twist, wring, or fold the fabric, particularly with blackout fabrics. Use care not to crush the pleats.
    • Do not use strong detergents or spot removers.
    • Do not immerse in water.
    • Do not dry clean; doing so may void the warranty.

Back to Top

Soft Sheers Shades

• • Regular Cleaning: Dust with a feather duster or lightly vacuum fabric with an upholstery attachment.
  • Soil and Stain Removal:
    • Soft Sheers should not be spot-cleaned.
    • Do not immerse in water.
    • Do not dry clean; doing so may void the warranty.
    • Commercial ultrasonic cleaning or injection/extraction cleaning is recommended for most fabrics.

Back to Top

Drapery, Valances, & Swags

• • Regular Cleaning: Dust with a feather duster or lightly vacuum fabric with an upholstery attachment.
  • Soil and Stain Removal:
    • Instructions may vary by fabric – ask us before cleaning if you are unsure.
    • Gently sponge with a solution of mild detergent and warm water, then blot dry.
    • Test spot treatment sprays on inconspicuous area before use on visible areas.
    • Wash on delicate cycle with cold water in commercial washer, half normal load size, using mild detergent.
    • Tumble dry on low heat, delicate cycle. Do not over-dry.
    • Iron on low setting only, as needed.
    • Professionally steam clean or dry clean if necessary.
    • Pole-mounted valances and swags:  Clean as instructed for drapery fabric.
    • Board-mounted valances and padded cornice boards: Gently sponge with a solution of mild detergent and warm water, then blot dry. Test spot treatment sprays on inconspicuous area before use on visible areas.

Back to Top

Drapery Hardware

• • Regular Cleaning: Dust with a feather duster or lightly vacuum with an upholstery attachment.
  • Soil and Stain Removal: Gently sponge with a solution of mild detergent and warm water, then blot dry.

Back to Top

Wood & Faux Wood Cornices

• • Regular Cleaning: Dust with a feather duster or lightly vacuum with an upholstery attachment.
  • Soil and Stain Removal:
    • Wood: Clean with Pledge, or other spray polish for wood products, and a soft cloth. Do not use abrasive cleaners or solvents. Do not immerse in water; doing so may void the warranty.
    • Faux Wood & Composite: Gently sponge with a solution of mild detergent and warm water, then blot dry. Do not use abrasive cleaners or solvents. Do not immerse in water; doing so may void the warranty.

Back to Top

Light Shelves

• • Regular Cleaning: Dust with a feather duster or lightly vacuum with an upholstery attachment.
  • Soil and Stain Removal:
    • Gently sponge with a solution of mild detergent and warm water, then blot dry.
    • Do not use abrasive cleaners or solvents.

Back to Top

Cubicle Curtains

• • Regular Cleaning: Dust with a feather duster or lightly vacuum fabric with an upholstery attachment.
  • Soil and Stain Removal:
    • Gently sponge with a solution of mild detergent and warm water, then blot dry.
    • Test spot treatment sprays on inconspicuous area before use on visible areas.
    • Wash 160 degrees F max. in commercial washer,  using mild detergent.
    • Do not use bleach or fabric softener.
    • A 30-second spin cycle may be used to remove excess moisture.
    • Tumble dry on low heat, 3-5 minutes. Remove while still damp; do not over-dry.
    • Iron on low setting only, 275 degrees F max., as needed.
    • Do not dry clean; doing so may void the warranty.

Back to Top